Well guys... it was bound to happen. My VE pumped bus #3 (1989 Bluebird TC2000) left the kids stranded on the road.
Unlike the new buses, which require towing to dealership for replacement injection pump, the repair involved re-connecting the pump's solenoid power wire. About seven second repair job.
:-laf :-laf
She is driving a 1989 model cause her "new" Cummins powered bus is back at the dealership for "fuel system warranty reapairs".
You should have seen that drivers face when I turned the key and she roared back to life again after a seven second repair
Think I'll scrap the spade connector and use an eyelet on the solenoid stud.
BTW, Cummins has recognized the potential problem with the ISB engine in a school bus and has issued a recall on lift pump and injection pump. I get new injectioN pumps, lift pumps and the addition of a lift pump pressure sensor. I'll still have the same problem, however, now the engine warning lamp will illuminate when I loose lift pump pressure.
-S
Unlike the new buses, which require towing to dealership for replacement injection pump, the repair involved re-connecting the pump's solenoid power wire. About seven second repair job.



She is driving a 1989 model cause her "new" Cummins powered bus is back at the dealership for "fuel system warranty reapairs".
You should have seen that drivers face when I turned the key and she roared back to life again after a seven second repair

BTW, Cummins has recognized the potential problem with the ISB engine in a school bus and has issued a recall on lift pump and injection pump. I get new injectioN pumps, lift pumps and the addition of a lift pump pressure sensor. I'll still have the same problem, however, now the engine warning lamp will illuminate when I loose lift pump pressure.

-S