Clutch pedel. Possibly in the truck as a whole. I need to grab a truck simular and take it for a spin to see if I'm crazy 
But the clutch pedel thing is defintly not right. Only when enguaged, just as you press down on things you feel the vibration. As the floor is reached everything is cool. I did have a Dodge Cumin's tech take my truck for a spin, he sugests everything is fine, just that the motor was giving a little feed back. Higher the RPM/load, more vibration felt.
As a side note, the drive shaft loop was busted a bit ago, and it was replaced. This issue came up after that I suspect. Could a slight imballance in that travel though the trans to the clutch things a bit?
Also, the shifter seems a little stiff too when things are wamred up. I have extreamly smooth and effort less shifting when things are warming up to normal temps, once I'm crusing on the eway, it takes a bit more, nothing extream, but a bit more effor to change gears. Is this normal?
04. 5 2500 6speed
--
Jason

But the clutch pedel thing is defintly not right. Only when enguaged, just as you press down on things you feel the vibration. As the floor is reached everything is cool. I did have a Dodge Cumin's tech take my truck for a spin, he sugests everything is fine, just that the motor was giving a little feed back. Higher the RPM/load, more vibration felt.
As a side note, the drive shaft loop was busted a bit ago, and it was replaced. This issue came up after that I suspect. Could a slight imballance in that travel though the trans to the clutch things a bit?
Also, the shifter seems a little stiff too when things are wamred up. I have extreamly smooth and effort less shifting when things are warming up to normal temps, once I'm crusing on the eway, it takes a bit more, nothing extream, but a bit more effor to change gears. Is this normal?
04. 5 2500 6speed
--
Jason