I have had the EZ installed for about a week now. I have noticed a very noticable vibration eminating from the turbo area when the box kicks in the extra fueling.
The box is set at the max fueling, the elbow is installed, seeing 27 psi max, and around 1100 deg when towing a 5500# trailer up a 8% grade in overdrive at 65mph. The power is great, infact I can break loose the rear tires on the paint lines at intersections when taking off wit trailer in tow. I have a Jarding 4" pipe and bosch 275's installed.
The vibration shakes the whole cab and is present either towing or not. Has anybody else had this vibration or any ideas on what it may be? I dont want to introduce a vibration of this magnitude into a rotating mass spinning at 40,000 RPM or so, I dont think the bearings will take it?
I have also noticed that the truck seems to buck forward and back or sort of miss a little bit when towing like things are just not in sync, kind of stumbling. Any body else have this same thing going on>
------------------
2001 WHITE 2500 QC, LB, 3:54, 4x4, ETC/5-SPEED, HD TRANSFER, FACTORY FOG'S, MOPAR MUDFLAPS, AUTOMETER ULTRA-LITE PYRO & BOOST, BOSCH 275'S, K&N IN STOCK BOX, SILENCER RING AOL, JARDINE 4" IRRIGATION PIPE, BFG 285/75/16 ALL TA'S ON EAGLE SERIES 58, ICS NERFS, ARMA TUFF SPRAYED BED, LOOKING FOR AN EZ FIX. 16000 MILE SINCE JUNE ****POLARIS 700 RMK RULES THE HILLS****
The box is set at the max fueling, the elbow is installed, seeing 27 psi max, and around 1100 deg when towing a 5500# trailer up a 8% grade in overdrive at 65mph. The power is great, infact I can break loose the rear tires on the paint lines at intersections when taking off wit trailer in tow. I have a Jarding 4" pipe and bosch 275's installed.
The vibration shakes the whole cab and is present either towing or not. Has anybody else had this vibration or any ideas on what it may be? I dont want to introduce a vibration of this magnitude into a rotating mass spinning at 40,000 RPM or so, I dont think the bearings will take it?
I have also noticed that the truck seems to buck forward and back or sort of miss a little bit when towing like things are just not in sync, kind of stumbling. Any body else have this same thing going on>
------------------
2001 WHITE 2500 QC, LB, 3:54, 4x4, ETC/5-SPEED, HD TRANSFER, FACTORY FOG'S, MOPAR MUDFLAPS, AUTOMETER ULTRA-LITE PYRO & BOOST, BOSCH 275'S, K&N IN STOCK BOX, SILENCER RING AOL, JARDINE 4" IRRIGATION PIPE, BFG 285/75/16 ALL TA'S ON EAGLE SERIES 58, ICS NERFS, ARMA TUFF SPRAYED BED, LOOKING FOR AN EZ FIX. 16000 MILE SINCE JUNE ****POLARIS 700 RMK RULES THE HILLS****