Here I am

2nd Gen Non-Engine/Transmission What year wheel will fit 96

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) Why does my thermostat....

Engine/Transmission (1998.5 - 2002) OEM air filter ?

Status
Not open for further replies.

4570

TDR MEMBER
I have a 96 2500 and need a chrome steel wheel for SLT,5 spoke 8 lug . What years of this wheel will fit ?. I am planning to look at some from Criags list but am not sure what years fit . Arnie
 
Sounds like if there 16s and 8 lug then any year will fit . That will make it simple . Arnie
 
Try ebay at "redlinear" store. He's out of Hartman Arkansas, and parts out all sorts of dodge trucks. Reasonable prices, and a huge selection of stuff.
 
No, they aren't all interchangeable. Search the forum, this question has been discussed before.

The original question was what fits a '96, answer is anything from '94 to 2011 for the Dodge wheels. Also GM wheels supposedly fit and Ford pre '99, but because the center hub is different diameters on GM & Ford I would stick with Dodge wheels.
 
Last edited:
the track changed in year 2000 so you need to pay attention to the offset or you may end up the new wheels along with new look 'cause the tires may stick out a couple of extra inches.
 
I guess i will be safe with 1994 to 1999 wheels . Thats plenty of spread to look for .

Had a tire go bad this weekend . The tread seperated from the casing about a foot long and half way across the width of the tread . It caused some weired feelings both accelerating from a stop and at highway speeds . Drove about 20 highway miles at 55 to get home . Kept feeling like the wheel was loose . Arnie
 
Status
Not open for further replies.
Back
Top