Guns, Bows, Shooting Sports, and Hunting Xdm 45

[Chief USA]

Sportsmansguide sell Remington 10mm, 180 grain MC for $25. 43 if yo are a Buyers Club Member, $26. 77 otherwise for a box of 50.



Remington Umc Handgun . 38 Super Auto (+p) 125 Gr. Jhp 50 Rds. , Pistol Ammo, Remington at Sportsman's Guide



They also sell Federal American Eagle 180 grain FMJ for $500. 24 for 1,000. That comes to about $25. 01 a box but the Federal is a good bit slower ammo.



Federal American Eagle Pistol . 380 95 Gr. Fmj 1,000 Rds. , Pistol Ammo, Federal at Sportsman's Guide



If you are not concerned about reloading your training ammo, they sell CCI Blazer 200 grain TMJ for $22. 77 per box of 50.



For good quality, effective, and affordable carry ammo, they sell Winchester 175 grain Silver Tip box of 20 for $17. 83



Winchester Cowboy Loads . 38 Special 158 Gr. Lfn 50 Rds. , Pistol Ammo, Winchester, Winchester Cowboy Load Pistol Handgun Revolver Ammo Ammunition Cast Lead Bullet Rounds . 38 Special at Sportsman's Guide



Yes, I understand the inner workings of the Glock. I have experience modifying them. Was just keeping it simple short and sweet.



The 3. 5 lb. connector and NY1 spring kits work pretty well on improving trigger pull on the Glock in my opinion. Much lighter than this kit provides might not be a good choice for a carry weapon in my opinion.

 

[The patriot]

I have an EAA longslide in 9x23. It's an awesome gun.

 

[DSeamans]

Chief - How hard was the kit to put in the glock? I plan on putting one in the XDM but haven't decided how far to go, They have a basic drop in that chances springs and adds overtravel stop to a full custom install with a new trigger and sear that has to be fit. I've done jobs on everything from a 95 mauser to my super blackhawk. I haven't messed with a striker - yet. I like that the XDM has a point that it firms up just before release and has a fairly short reset.

 

[DSpringstead]

I have had a XD45 for 5yrs now. Absolutly love it, Have had no FTF's, nothing. But I wasn't done with it yet. I sent it back to the Springfield custom shop for $800 worth of custom work. Now it's the way all XD's should come. I had the sights replaced with my own Tru-Glo TFO's, NM barrel, extended mag release, Springfield's "extreme Flauge" finish, 4lb trigger with all overtravel removed, plus had the entire grip stippled. At 25 yds I can put them in a 4" area. Just can't beat that.