This new software is custom tuning for each indivual truck. I take tuning to find the correct setting to your liking.
The options are
5. Adjusting optional parameters
Before the programming, Smarty proposes the adjustment of the optional parameters.
To enter this function, press 2 in the Options menu:
1=Connect Truck
2=Adjust options
The list of optional parameter varies according to the installed software.
For each parameter, the current option status is shown on the first line of the display. With Smarty
numeric keyboard, the optional parameters can be adjusted.
To maintain unchanged the current parameter, press the '>' key.
You can return back one step, in any moment with the ‘<’ key.
Speed limiter
The speed limiter can be adjusted anywhere from 25 to 250 MPH in one MPH steps.
NOTE: only 2001 and 2002 trucks the speed limit value is the real MPH speed. In older trucks, the
speed limit is only a speed factor that compensate the maximum speed.
IMPORTANT NOTICE
Your tires might not be rated for increased speeds. Please check your tires rating!
Speed lim=Stock
New lim=___
To set the speed limiter to Stock, select 0.
Torque
The Torque selection can be programmed with a value between 1 (stock) and 6 (high). To use the
default torque setting for the current CaTCHER level, press 0.
Torque=Default
New T. =
Injection Timing
The Timing selection can be programmed 1 (stock), 2 (advanced), 3 (moderate) or 4 (wild). To use
the default timing setting for the current CaTCHER level, press 0.
Timing=Default
New T. =
Injection Duration
The Duration selection can be programmed with a value between 1 (stock) and 5 (high). To use the
default duration setting for the current CaTCHER level, press 0.
Duration=Default
New D. =
Clear as mud? :-laf
Attention: TDR Forum Junkies 
