How to pull connectors on ECU

[p-Bar]

Hi all,
Installing exhaust brake and need to pull one of the ECU connectors to tap some wires. How is this held in ? Best way to pull?

 

[sag2]

You need several of the 6934 tool. They are easily damaged so get several.

 

[Ozymandias]

Disconnect the Batteries.

There is a screw in every connector, take it out then you can pull the connector.
Don't try to pull the cables out of the connector, there's no need for to install the EB Harness.


Do all cable connections absolutely water tight with soldering and shrinktube.

 

[Ozymandias]

Double Post

 

[p-Bar]

Disconnect the Batteries.

There is a screw in every connector, take it out then you can pull the connector.
Don't try to pull the cables out of the connector, there's no need for to install the EB Harness.


Do all cable connections absolutely water tight with soldering and shrinktube.

Thanks Sag the 04.5 doesn't need pins pulled just tapped into . Ozy thanks for the advice .