2nd Gen Non-Engine/Transmission ABS question

[Don Bellamy]

I have a 2000 Dodge Ram ext cab 4wd 5 speed would anyone know if it has rear wheel ABS only or both front and rear? Seems this matters when getting the correct rubber brake lines for the front, thanks for your time.

 

[SnoKing]

Given that there is no tone wheels and/or sensors on the front wheels, I would say rear only!

 

[Wayne M.]

You can follow your hard lines from the master cylinder down to the next stop. If its a large block with an electric motor on it, you have 4 wheel. If they end in what looks like a proportioning valve with small solenoids on it close to the master, you have Rear only. Also as snoking recommended, look for sensors at the front wheels.

 

[Don Bellamy]

Thanks for the reply, I found the paper work that came with the truck that shows everything on and about the truck, it has rear wheel only

 

[Tractorat]

I didnt think 4 wheel abs was available until 2001.5 or 2002.

 

[SnoKing]

I didnt think 4 wheel abs was available until 2001.5 or 2002.

Correct. The 2001.5 got rear disc brakes and they have 4 wheel ABS. The front wheel sensor wires piggy back on the brake hoses. SNOKING

#ad

 

[Bob4x4]

the early years 4 wheel abs was an option later it became standard equipment

 

[WalterRyan]

I didnt think 4 wheel abs was available until 2001.5 or 2002.

I have an early 2001 with drums in the rear and it has 4 wheel abs. The module looks exactly like SNOKING's picture and it has wheel speed sensors on the front.