road wonder.

[Killer223]

My truck 04 qqlb, as developed road wonder, it likes to drift from line to line.

My gear box has a slight leak, it's had a brace on it at mile 160K and well over 350 now. ball joints are good, tie rods are good less then 40 K on both ball joints and tie rods,

Track bar?
control arms?
I don't know about the new updated gear boxes as I'm not sure my brace will work.? does anyone know?

Give me a list of stuff to get.

 

[Ozymandias]

Alignment?

 

[Yo Hoot]

Could be track bar. Crawl under and have someone move the wheel back and forth looking for loose joints.
Also could be wheel bearings.
Depending on the environment you run in the control arms could be going also. My truck spent 190,000 mile and 18 years in the northeast with salt and snow. The bottom of the control arms were rusting away.
I replaced my steering box many years ago with the large shaft Delphi unit. That eliminated any death wobble issues I had had before that swap.

 

[Killer223]

Alignment?

it's great, doesn't wear tires funny at all. I had it set to thurens specs when new balljoints were installed.

 

[Killer223]

Could be track bar. Crawl under and have someone move the wheel back and forth looking for loose joints.
Also could be wheel bearings.
Depending on the environment you run in the control arms could be going also. My truck spent 190,000 mile and 18 years in the northeast with salt and snow. The bottom of the control arms were rusting away.
I replaced my steering box many years ago with the large shaft Delphi unit. That eliminated any death wobble issues I had had before that swap.

thanks for the track bar thoughts. and feel bearing they are originals. , control arms are kinda new about 40K ago.
I under coat here in AZ but not much salt compared to the Northern states.