Recent Content by JAshpaugh

You might try checking all the grounds and neutrals. DC voltage is weird and if things aren't grounded properly it heats stuff up and fuses start popping. My 07' Weekend Warrior 5th wheel was popping a 30 amp fuse at will. Come to find out that all the grounds and neutrals were loose. Just a...

I got my Pullrite Super Slide installed at Broken Wheel RV in Santa Ana. They were about $500 cheaper than anywhere else and did a great job...

I just got back from taking my 28' Weekend Warrior 5'er over the Grapevine from LA to Lake San Antonio. It weighs 10K +. I drove most of the trip in O/D but on the hills had to go to 3rd and on the Grapevine to 2nd. While in 2nd just held it at 2000 rpm about 40 mph. transmission never got over 190...

I went with the rest of the guys with the Firestone Ride-Rites. . Check www.jcw.com the have them for $229 and free shipping. . I installed them myself in about a hour. . I ran the air lines through the frame and put the air fill valves in the lower two holes where the license plate frame...

It was Fleetgard until I went to all AMSOIL. Now I use the Donaldson. I only drive about 7-8K a year and I change the oil once a year. No problems...

First of all, thanks to "grabinov" for the pics of his airbag set up. Now, I found a set for $245 for model 2299 with free shipping. Does anyone know of a better price or is this pretty good? thanks guys. . JOHN

I had a new Pullrite installed last week. A guy came in with a 06' Ford with the back window punched out and a big dent on the roof corner. He pulled into a gas station with a steep driveway. Remember, when the truck and or trailer articulate (go uphill or downhill while the trailer or truck...

Yeah, thats it exactly. Thanks. . I guess thats why the bracket that bolts to the frame it a weird shape. Which airbag set up do you have? Firestone makes three different models. . thanks again Can u send me a picture of the set up? if so. -- email address removed --

Is anyone running airbags with the SuperSlider? The plate for the super rail kit is in the same place the airbags would bolt. thanks... :confused: If I bolt the airbags to the plate, the airbag with not be vertical. The top will be tweaked outward that 1/4". '

Hey, I have a Pullrite super slider 5th hitch with the super rail kit. the kit has 1/4" plates that mount to the outside of the frame above the rear axles. Here's my question. I want to install some Firestone airbags and the mounting kit attatches to the same place as the 1/4" thick plates. It...

I put my transmission temp sending unit in the passenger side rear test port on the transmission. If you look there are two. I used the furthest one back. Works like a champ! I had to add about 2-3 feet of 18 gauge wire to the wires going from the sensor. I called Isspro and they are in the process of...

gauge help I just installed some Isspro's. I called Isspro regarding lengthening the trans oil temp gauge wires. They said you can add wire to the oil temp gauge sending unit, but NOT the EGT gauge, nor should you shorten the EGT wires. As far as the Isspro relay boxes. I used 3M double sided...

Isspro Gauges First, I daisy chained the light lead and grounds together. I unscrewed and pulled off the left side of the lower dash section. I had to unplug the adjustable pedal connection to expose the dimmer switch. I tapped into the orange/white wire from the dimmer and connected that to...

First of all, let me say thank you to those who answered all my questions during my "A" pillar installation adventure. I used the orange/wht wire from the dimmer and the cigarette lighter for my ignition/on hot. Everything works great. I did learn that when tapping the exhaust manifold use a...

Gott'er done. . Thanks. . JOHN