Recent Content by kytaylor21

Thanks guys, i used telescoping magnet and got lucky!! Thanks again

Has anyone had this happen before? If so how did you get the plunger out? 95 12 valve

Thanks ive heard good things about thoes

Hey guys im looking to buy a track bar for my 96 4x4 cummins with 2" level kit any ideas what kind is best

Both the key hole and electrical. Dang thing is mking me crazy I appreciate the advice

Just replaced ignition switch and still no fix... ... any other suggestions

Under hood on passenger side you will see the two hard lines coming from evaporator, each will have a small plug, one is high pressure switch, it shuts down the compressor when it reaches its max psi, the other is low pressure, keeps compressor from running when low on freon. You can pull the...

Have you checked High or low pressure switch?

Yes they will. I made that swap on my 96. Swaped out thhe old chrome mirrors for some tow mirrors off an 02

Mine would shake me off the road it was so bad, i rotated tires and it went away, forgot about it and months later (yesterday) i rotated again and death wobble was back, come to find out it was all cause by a tire slightly out of Balance

Hey guys I am looking for some hub bolts that hold the hub to the steering knuckle on my 4 wheel drive 95 dodge cummins any recommendations as to where I can get some without paying 30 dollars a piece

Sorry its a 95. Ive checked wires to the big harness but couldnt find anything

Ok last time i drove i had no speedo and no o. d today i drive and speedo starts bouncing and then normal and every thing works

So your saying the tps is what is causing the pr oblem?

Ok the od and lock up run on same switch from factory right? Mine only has one switch. Sorry this is my first auto