Search Results for Query: *

Thanks, got the codes P 2146 p 2149 I disconnected the battery for 5 minutes and the CEL went out. The truck is running great. Anyone know what these mean? How about that warranty question, anyone have experience with Dodge dealerships and their opinions of adding mods? thanks in...

I got a brand new 05 2500 and installed with hesitation the Edge with monitor. I just got a check engine light come on. Shortly after stepping into the power I stopped at a light then accelerated away normal when I noticed the motor felt like it was out of fuel or just puking. Then the...

Well,,, I took off the two big wires going to the heater yesterday morning when the temp was around 38deg. It started but it bucked, kicked and smoked until it got warm. I would consider the trade off if I thought it would increase my airflow. I guess I could measure this by...

Crazy question... I live in Sunny Florida. My truck seems to be suffering from lack of air (too much smoke). I want more power but I don't want any more smoke. The grid heater seems to be a big obstruction in my intake manifold. Can I take this out? At what outside temp will it be hard...

I would like to hear. When we are talking about High HP 400+ what is more fun to drive, Manual Automatic? considering both trannys are upgraded to handle the HP.

My fuel Gage stays on full all the time. It doesn't return to E when the key is off. Occasionally when the truck is really low it goes down to 3/4. I just replaced the fuel sender in the tank last year because it used to stay on E. It worked fine until a couple of weeks ago. Needless...

Fuel Gage broke My fuel Gage stays on full all the time. It doesn't return to E when the key is off. Occasionally when the truck is really low it goes down to 3/4. I just replaced the fuel sender in the tank last year because it used to stay on E. It worked fine until a couple of weeks...

Bill, I too own a 95 auto with high miles and without a doubt I can tell you that any modifications will impress the sh$t out of you. that big ole diesel is just waiting for more fuel and air. I tried to decide what my goals were before starting my upgrade quest but as soon as I felt that...

ok??? I reinstalled the boost elbow supplied from piers when I got my #6 plate. It made absolutely no difference in my max boost pressure. Any suggestions? John

I have tons of power now with the rebuilt pump from piers but my EGTs fly off the chart. at WOT my boost will hit 47lbs but the one thing I have noticed is as my boost goes over 35 my temps rise into the red. It was recommended to me with the pump mods that I have that I should plug my...

A little story about a bad miss at idle and how I fixed it. Just out of the blue my truck started idling really rough with low RPM, after researching in great detail, here is what I did. 1. Ran two complete tanks of fuel out with triple additive. NO EFFECT 2. Checked my overflow...

I presume from what I have read that the ideal location is after the fuel filter and before the pump. I noticed that it looks like I already have an 1/8 npt plug in the top of the fitting on my filter. Does anyone know if this has another purpose or if I can use it for my pressure guage? It...

Will fuel spray everywhere making a big mess? Or, will it just kinda leak a little out on the head? Thanks, John

Shortly after a fillup on a trip to the east coast "not loaded" I noticed my truck idling really rough and my rpms dropped from normal 750-800 to around 700 with AC on in gear. Thinking it might be fuel related I waited until the next fillup but it didn't go away. I just finished...

Thank you MLee I used a dremel tool and slightly ground down the manifold. the rag was a huge tip, I dropped everything trying to get it out but there it sat on the rag easy for my needle nose pliers to grab. The spring measured . 46" so I stretched it to 5. 5 reasembled but with...

My truck started idling really rough and apox 150 rpm less the other day. I thought it was my fuel but after a new fillup it didn't change. It runs great above 1200 rpm but rather rough below. Im trying to get the overflow valve out now and can't,, the intake mainafold seems to be in the...

I think Im ready to crank up the pucker factor. Where can I find some DDIII injectors and appropriate delivery valves for my puney little 160hp pump. It would be nice to find used ones if anyone has any to sell. Thanks John

I am thinking about buying this kit http://www.atpwrap.com/dodge_ram.htm Has anyone ever done one before and if so could you comment on the quality and effectiveness. Thanks John

If injectors and delivery valves will make more smoke then would a larger turbo or exhaust help reduce smoke. My EGT's are not a huge concern since I live in FL (flat) and I don't use the truck to pull heavy loads (2k boat). With the current setup I was only able to get the EGT guage to the...

You got ripped off!! :mad: I wonder how much that "I" is worth. . I think I would call my congress man. John