2nd Gen Non-Engine/Transmission Abs

[JKaptchinskie]

How can I tell if I have 4 wheel ABS or rear wheel ABS without taking the Hub off?

 

[JKaptchinskie]

I looked under the truck last night, and I see attached to the brake line is another line that runs into the hub right above the axle. I assume looking at the parts pictures that I have all wheel abs instead of rear wheel abs. Can someone confirm this for me?

 

[MarkMiller]

That should be the ABS line. Congrats you have all wheel BS. It is controlled by the computer that sits between the firewall and the underhood fuse block.

 

[JKaptchinskie]

Thx Mark. Wanted to make sure before I ordered the part.

 

[WestTN]

A quicker way to determine if you have 4 wheel ABS is to swee if you have drums or disks on the rear. All disks are 4 wheel and all drums are rear only.

 

[JKaptchinskie]

I have 4 wheel disks. Further confirmation - Thx, JK

 

[ttbird]

Not true that all rear drums are rear ABS only! I have a 1995 with 4 wheel ABS that I ordered in Sept. 1994. There were not alot of them but they do exist.

 

[LandShark]

I also have drum brakes with 4 wheel ABS on a '95. WIsh I didn't!

 

[RSimmons]

I have a 2000, 3500 with rear drums and 4 wheel ABS.

 

[MarkMiller]

Pull the fuse from the ABS computer, pull the bulb out of the dash and while your at it remove that load adjusting brake bias crap under the bed and your trucks will stop! I did that and couldn't be happier. My truck with 37 in tires stops faster than it did stock.