Plus a good aftermarket filter that meets DC specs. This works really well with cold air and taking out all the twisted tubes to the turbo from the factory air box. Look at the PSM system, less expensive and easy to do.Cool Blue Hose, PSM air intake
I use oiled foam filters on all of my dirtbikes... . if the filtration's good enough for a 100% offroad vehicle said:Ditto! That is why I have one. Speaking of dirt bike filters, there is a new filter oil and cleaner called no toil. It works great! You just have to clean your filter with a good solvent(gas) and then clean the petro out of it and then use the no toil filter oil. I have got all of my bikes, quads and cars switched over. I have cleaned a few bike filters and the stuff works great. About a 1/4 cup of cleaner in some water and 10-15 seconds. Clean as a whistle. And it is bio degradable so it can go down the drain.
Ditto! That is why I have one. Speaking of dirt bike filters, there is a new filter oil and cleaner called no toil. It works great! You just have to clean your filter with a good solvent(gas) and then clean the petro out of it and then use the no toil filter oil. I have got all of my bikes, quads and cars switched over. I have cleaned a few bike filters and the stuff works great. About a 1/4 cup of cleaner in some water and 10-15 seconds. Clean as a whistle. And it is bio degradable so it can go down the drain.