2nd Gen Non-Engine/Transmission allignment question

[PVanderlugt]

truck below, had an allignment done after I put in all new balljoints, toe was set to the minimum speck 0. 6 ? allignment guy said he likes to set them flat footed, factory max toe is I believe 1. 2. Does anyone know how many turns of the adjustment sleeve it takes to go from 0. 6 to 1. 2 ?? kinda want to play with it before I take it back. Are we talking 1/4 turn of the sleeve or 3 turns ? With all of the steering upgrades I have figured it should drive better then it does now, wanders all over the road

thanks Pete

 

[budnate]

at work dont have time to find it right now, there is a real good read from a factory tech his specs are better than the shops manual has... ... ... just had mine done last week, it took 2 tries with the punk kid but it drives pretty nice, do a search here and print the sheet and give it to the guy.



B.

 

[BarryG]

I have used these specs for years with no complaints and may be the ones the previous poster was reffering to.

Ram steering specs

 

[budnate]

there is another one and guy goes on to exsplain why

 

[PVanderlugt]

yep , i have those specks as well, just was going to play with the toe a bit before I took it back, and wanted to know how sensitive the adjustment sleeve is, like I said, 1/4 turn or 3 turns ? truck drives smooth, no vibration or pull, just wanders.
Pete

 

[budnate]

Barry is right I found my spec sheet and its the same the as Geno's link.