Seems like there are plenty of lite lovers out there, and bless you all! The pre-runner light bar is very cool, I like the look.
I too like to add accessories and lights, I have a Ford with a FabTech lift and the whole pre-runner them, it is fun to drive and gets alot of attention, not many like it arroud here.
My Dodge has several changes that while suttle, still manage to give it a new and differant look. The front has Piaa 525 lights mounted in the bumper. The bumper also has 2-2 1/2" LED, and 2-2" LED flush mounted lights that serve as turning signals. The front grill has a hand full of small LED's that make a large C for Cummins, they are low intenseity blue lights that look pretty good at night. The side and rear marker lights have been changed out to 12-Led units, they are a direct replacement that looks very nice. The roof marker lights have been changed to LED's, they are 5-led units that replace the 194 lamp. The rear tail lamps have been changed and the rear bumper houses a pair of Piaa 510's and 2-2 1/2" and 2-2" LED flush mounted turning signal lamps. The third brake lite has been changed to LED and a back off safety modual installed. A undercover strobe light kit has been installed, it is a 6 channel 90W unit with two strobes in the headlights, two in the front turning signal lamps and two in the rear tail lights. I also installed 6-clearance lights on each side under the door, they too are Led.
Just this last week, while I was adding some underhood insulation, I installed 3 blue led's in the raised part of my hood scoop. If gives a faint blue glow, that is visable from the inside of the truck, illuminating the scoop inlet.
#ad
#ad
#ad
Large Cummins-C
#ad
Led marker lights that replace the stock lights
#ad