Anyone have the Lindstad Trac Bar kit?

[Texas Diesel]

The url is gone, need the name and phone number.



TIA

 

[Lsfarm]

Lindstad link

I use the kits, and they work very well. .



Here is the link to their site.



http://www.blackhills.com/lindstad/



Greg L The Noise Nazi

 

[Texas Diesel]

It doesnt work

 

[Matt42]

Worked OK for Me

Well, huh. I have the Lindstad kit on mine, and it has worked OK. At the time, it was just the Lindstad kit and the DT trackbar available. The Lindstad kit requires welding, and I'm not set up for anything too heavy for my antique oxy-acet rig. So I bought one of Lindstad's ready-made track bars. I installed a polyethylene (sp?) bushing on the other end, and it's been fine. I check the tightness of the adjustment plug at each oil change. It needs 1/4 turn about every fifth change.



Lindstad's been OK for me, with no real interference with the diff cover. I kept the OEM track bar. (Shipping cost was about the same as core value. ) It's a known factor, with 35K miles on it. I may eventually rebuild it with Luke's Link and reinstall it. But it's a low priority.



Matt

 

[Howard Durand]

The Link doesn't work.

 

[HEMI®Dart]

off topic

Darins T-Bar should be almost done.



http://www.solidsteel.ca/news.htm

 

[Lsfarm]

Link Inop

Well when I copied the link for the above message, I was on their site, but now when I try it [I have the site address bookmarked] the site is not available. So I guess they are having a few problems with their site or server.



I found my receipt from my last purchase from them so here is their phone #:

1-605-892-4776

1-800-432-0017



The product is good, but does require an occasional adjustment, which is a heck of a lot better than the occasional trackbar replacement!!



Greg L. The Noise Nazi.

 

[Texas Diesel]

Thanks for the #'s