Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
TDR Magazine subscribers receive more than the magazine! You also gain additional forum privileges!
Details here: TDR Privileges
Subscribe to TDR Magazine here: https://www.tdr-online.com/
Attention: TDR Forum Junkies To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.
I don't think you'll find a one stop kit like you will for, say muscle cars, but you will be able to put together what you need easily with suppliers on this site. I'm sure other 1gen guys will advise better.
At 120,000 miles I replaced my Getrag with an NV4500HD.
You will need at least the following to go from an auto to a manual trans.:
A flywheel.
Clutch PSI plate & clutch.
Clutch hydraulics.
Compatible bell housing.
NV4500HD or manual trans of your choice.
Other depending on trans used.
I had to:
Shorten Drive Line 6.5"
Made a new trans. cross member and trans support.
Added a trans filter kit.
Added a trans cooler.
Ran electrical senders from rear diff. and trans. thru a SPDT switch to watch towing temps.
Others who have done this conversion will probably have some good suggestions.