Best way to change fuel filter 2007.5 3500 4x4

[rfitzgarrald]

Friend has 2007.5 c/c 3500 4x4. What's the best way to r&r the fuel filter. I'm assuming it's the same as a 2wd.

 

[Killer223]

through the finder well.

 

[Jim W]

You need to take the fender liner out a couple of screws and you can removed the fender liner. The rest is kind of easy after that.

 

[rfitzgarrald]

You need to take the fender liner out a couple of screws and you can removed the fender liner. The rest is kind of easy after that.

Thanks. That's what I thought. I do it that way for my 2wd and my friend didn't believe me.

 

[Killer223]

I go through the top, but I don't the the engine wing anymore. Once loose from the fender well I take it out the top.

 

[Flopster843]

I use a long extension and a universal from underneath to break it lose and drain, then I reach in from the top to spin it the rest of the way out by hand and pull it out. I'm to lazy to remove the fender liner every time I want to change the filter out.

 

[Jim W]

I have a 4X4 and an extra 2 mu fuel filter in the area. So I have to remove the inner fender liner.

 

[crispyboy]

I use a long extension and a universal from underneath to break it lose and drain, then I reach in from the top to spin it the rest of the way out by hand and pull it out. I'm to lazy to remove the fender liner every time I want to change the filter out.

I do the same. Drain out as much as possible then through the top.