BRAKE CONTROL

[DUALLYMAN]

I have a Tekonsha Voyager. I have brakes on trailer when you push lever over, but not when you push brake pedal. I have all wires matched up according to intructions.

 

[JohnB]

Using a test light, ground one side and poke into the wire from the brake light switch. You should have power when the pedal is depressed to energise the controller. If you do, the controller is faulty, if not you need to determine why. I'm not near my truck, but the wires on the controller are labeled.

 

[DUALLYMAN]

I appreciate the info JohnB. I found the problem just after i left the house.