Here I am

Checking Engine Hours... how do ya?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Fass 200 Questions

Why run twins when the new singles are so good?

Status
Not open for further replies.
OK. I searched the forums like a good little boy. I cannot find the key on key off procedure for checking the engine hours on our trucks (2000 - 2005 models).



I have even done it on the '05 before, but I am drawing a blank.



Anyone?
 
How many hours are on your truck. Turn key to run (do not start) press and hold the trip button for 6 seconds then hourmeter will display. My 05 has

29019 miles divided by 666 hours= 43. 57 Avg miles per hour.



Bill Davis
 
Im not 100% sure on this i think you turn the key to the run position push and hold your trip button for 5 or 10 seconds, your engine hours should come up.
 
I just crossed the 4000hr mark a short time ago at about 181,000miles. I would discount a used truck that showed excessive idling. I know most average 30 to 35 MPH, but mine has always been in the 45 to 45 1/2 MPH range.
 
This thread fascinated me so I checked my '06 w/ 5585 miles and found 156 hours @ 35. 8MPH. I then tried my Chrysler 300, AND IT WORKED! Even indicated "Hrs" in the window.



Dan
 
they are calculating Miles Per Hour, not Miles Per Gallon

I see a lot of MPG's flying by... ... . total miles divided by total hours is total average Miles Per Hour
 
Status
Not open for further replies.
Back
Top