The new Dodge CNG (I know its a Hemi) uses CNG - where does one get that refilled? And yes it is used on Diesels ... . look at this Iveco site using Cummins 8. 3... . read later in the article...
Four ultra light weight gas bottles with a combined capacity of 170 cubic metres
were fitted behind the cabs, the engines were plumbed and instrumentation and
high-pressure regulators fitted. The engines were run, tested and fully certified
before returning the trucks to IVECO for final inspection. The fully warranted
trucks were now ready to go to work.
And after more than six months of regular, day-to-day concrete deliveries, how
have these innovative trucks been performing? – Above and beyond
expectations according to Boral Concrete Fleet Manager, Richard Smithson.
“Naturally with a project such as this, unique to the concrete agitator business in
Australia and potentially worldwide, there has been a process of development
and fine-tuning of these trucks, with no dramatic problems as such to solve at all
– a credit to all partners in this exercise – Boral, IVECO Trucks, Cummins,
Advanced Fuel Technology and Sydney Truck Sales.
“We have also benefited from the inputs of a team of highly skilled, hand-picked
drivers who have been able to provide technical and operational feedback to our
mechanics and technicians who in turn have been able to configure the trucks
for maximum operating efficiency and ‘driver-friendliness’ – and we have a
ready-made benchmarking system to prove performance by comparing the CNG
trucks to our almost identical diesel powered agitators.
“We were immediately pleased to learn that though power output is slightly
lower, torque is higher – 280HP and 850 ft lb torque at 2400 rpm for the CNG
trucks compared with 285 HP and 800 ft lb at 2200 rpm for the diesels. Despite
the lower power rating, these figures reflect improved ‘drivability’ of the gas
trucks.
http://www.iveco.com.au/Pdfs/Press Kits/Boral.pdf
But again where are they filled... ... .
Four ultra light weight gas bottles with a combined capacity of 170 cubic metres
were fitted behind the cabs, the engines were plumbed and instrumentation and
high-pressure regulators fitted. The engines were run, tested and fully certified
before returning the trucks to IVECO for final inspection. The fully warranted
trucks were now ready to go to work.
And after more than six months of regular, day-to-day concrete deliveries, how
have these innovative trucks been performing? – Above and beyond
expectations according to Boral Concrete Fleet Manager, Richard Smithson.
“Naturally with a project such as this, unique to the concrete agitator business in
Australia and potentially worldwide, there has been a process of development
and fine-tuning of these trucks, with no dramatic problems as such to solve at all
– a credit to all partners in this exercise – Boral, IVECO Trucks, Cummins,
Advanced Fuel Technology and Sydney Truck Sales.
“We have also benefited from the inputs of a team of highly skilled, hand-picked
drivers who have been able to provide technical and operational feedback to our
mechanics and technicians who in turn have been able to configure the trucks
for maximum operating efficiency and ‘driver-friendliness’ – and we have a
ready-made benchmarking system to prove performance by comparing the CNG
trucks to our almost identical diesel powered agitators.
“We were immediately pleased to learn that though power output is slightly
lower, torque is higher – 280HP and 850 ft lb torque at 2400 rpm for the CNG
trucks compared with 285 HP and 800 ft lb at 2200 rpm for the diesels. Despite
the lower power rating, these figures reflect improved ‘drivability’ of the gas
trucks.
http://www.iveco.com.au/Pdfs/Press Kits/Boral.pdf
But again where are they filled... ... .