Just walked in the house..... whoo... Just finished my FASS 150 installation with the RACOR 2micron filter and see through bowl. I insulated all the brackets from the fass to the bracket with 3m double sided tape. bracket to frame mount with dynomat. frame mount to frame with dynomat. Turned on the ignition and the fass pumped fine and I can SEE my fuel in the bowl WOW ! You can hear the pump run but with no resonance. I hope it stays this quiet once I get it hooked into the CP3. Thanks goes to Brady at II for the pump and RACOR filter.
PS... I also coated all the body panels and bed near the pump with dynomat also.
PS... I also coated all the body panels and bed near the pump with dynomat also.