Engine/Transmission (1994 - 1998) Cpff Kdp Jig Locations

[Cooker]

If anyone is interested in getting on a KDP list please PM me.



Thanks,

Ryan

 

[pwknapp]

Jig Party on da bayou

Anyone in the Baton rouge area needing a jig fix is welcome to join us. Supposed to be getting a jig in the next couple of weeks.

Soon as I get a better time frame will post.



PM if you want to join in.

 

[CPFF]

More Jigs sent out

Two more jigs were sent out this week.

Their "care-takers" are Cooker and Bowhunter.

I have another member who volunteered to be a "care-taker" of a jig. He is eGarwood. As soon as he sends me the first address I'll send out a third jig. If you need one, PM one of these guys.



I would like to see them keep moving within a geographical area, rather than ping-ponging across the country - wastes time & money shipping.



These new kits now have a pulley-holder and fan wrench included. If I can catch up with the other kits out there, I'll send a wrench and holder to add to them.



I would also like to thank those who sent contributions to help with the cost of making and shipping the jigs and also the kind words. Both are greatly appreciated.



CPFF

 

[Brandon]

ca jig is getting sent out tomorrow

 

[CWeidenkeller]

Apparently the KDP jig is coming at me. Since I wont have time to get it done before Saturday, maybe I can get CPFF to send me the extra goodies he has for this thing. Anyone in the Riverside/San Bernardino area, holler at me if you're interested in killing your DP. We'll make a party of it.

 

[Brandon]

mail 25bucks tooo

Mail your checks or Money Orders to CPFF: John Strenkowski,

1912 Exeter Road, Lebanon, Ct. 06249

 

[CPFF]

Other parts

If you are getting the jig next, PM me your mailing address and I'll ship a pulley holder & fan wrench out. I don't know how long it takes to get to the left coast from here. It maybe early next week.



CPFF

 

[Brandon]

number 8 jig going to Cweiden Keller in morning. Shipping from back east out west takes 5 days. So I would rather send it to the next guy. So he has the stuff when the jig gets there and can package it together and send out at one time. Any other ideas????????



B... ... ... .....

 

[CPFF]

Sounds like a plan. Let me know as soon as you can who the next one is. (Name & shipping address)



Thanks John

 

[Brandon]

when people pm to get on the list for the jig please leave a ph# as well as a shipping adress ... ... thank you



and when you receive it please notify me when done so we can send it on to the next guy...



try to get the job done asap so the jig is not sitting idle thanks







Brandon

 

[M Barnett]

If anybody in the Southeast needs to use a jig, send me a PM or e-mail.

Michael

 

[Brandon]

1- Master -- Stays Home

2- Blue Chip Diesel

3- illflem

4- Auto Wurks Diesel

5- vc victor in florida ..... sent to ramminon *****

6- DRawson *****

7- RRaulston ****

8- brandon

9- MGM

10- Redmond Ent. TX. (Does Mobile rep. serv. )(972)398-3934

11- Dave Mitchell Ent. Ohio (740)246-6329

12- cpff emergency jig

13- no jig

14- bowhunter and cooker

15- mbarnett

16- egarwood yet to be determined

*****=needs to be found and have a caretaker





thanks Brandon

 

[Cooker]

Brandon,



I'm not sure that is 100% correct.



I was informed I am watching #14.

 

[bowhunter]

Cooker is right,



I have jig 14

 

[M Barnett]

And I should have #15.

M Barnett

 

[Brandon]

kdp jig number 5 and 7 do need to be found for sure



any takers???????????????????

 

[Oliver88]

I'm wondering where the jig is for the North Carolina area.

Greg

P. S. I'd like to get on the list.

 

[M Barnett]

Brandon, maybe we could go a little farther with our organizing by putting up a list of the caretakers and the area their jig will be working. Then when a fellow needs a jig, he will know who to contact. If my jig is ready to go and nobody to go to, then I will contact the other caretakers and find somebody on their list closest to the jig and have it sent to them so it isn't sitting idle. -----M Barnett--Jig #15 working the Southeast USA

Michael

 

[eGarwood]

Northeast Jig

Hellooooo... I am caretaker of Jig# 16. I am going to try and keep it circulating in the Northeast area. Any TDR members in the N. E. can PM me to get on my list. As an update jig # 16 is scheduled to go out MON. Feb. 4 to J. Rowe. as per CPFF.

 

[MxerChris]

Does anyone know if there plans for a KDP party in the Southeast, I live just south of Birmingham and would definetly like to get mine fixed. Is there a list for the Southeast? Can I get on it? Or will someone have it down this way and we can do a couple of them together, I'm a pretty good shadetree mechanic and would like to help anyone in my area. Thanks, Chris... ... .....