CT Coffee Nites / Banter Thread 2007 Check For Updates!

[TORQUE THIS]

Even with block and head damage, it is running again!!!

Going back tomorrow for the re-torque around 1pm.


HUGE thanks to Matt and Jim.

 

[PRattenbury]

Good to hear. I doubt those small wounds will give you trouble. Does it run smoother than it was?

 

[Stark_Ent9802]

Niceeeeeeeeeeeeee

 

[Signal73]

Ahhhh dont worry 'bout it it'tl be fine

 

[TORQUE THIS]

yes it runs much smoother...

now i need to fix the exhaust so it stops vibrating against the frame...

AJ, me and Matt were talking earlier about your truck. One Saturday, put a new head gasket in the white truck with studs.

 

[Warpig]

Hey, I need a head job, what about me?

 

[PRattenbury]

Well, take whatever you want of mine to get the exhaust right. I'll be in Indiana all next week, BTW.

 

[TORQUE THIS]

might just buy a whole new system... e-bay...

Pig, you want head?? Ya shouldn't have busted the massage parlor girls... :-laf

 

[TORQUE THIS]

BTW, nice B-Day pic for the ToolMan...

 

[Stark_Ent9802]

AJ, me and Matt were talking earlier about your truck. One Saturday, put a new head gasket in the white truck with studs.

Yeah thats sounds fine to me. Where should i buy the gasket and the studs? about how much $ am i looking at?

 

[Signal73]

Studs $400-425

Gasket $100 @ Cummins

 

[Warpig]

Studs $400-425

Gasket $100 @ Cummins

Jim and Matt both like Coors light... ... 30 pack $20. 00

 

[Signal73]

Jim and Matt both like Coors light... ... 30 pack $20. 00

Skip the 400-425 and just say $425. The shop that was running the $400 special is no longer doing it.



There about the same price wherever you go.

 

[Stark_Ent9802]

I'll continue to pray for snow.

 

[Signal73]

AJ... .....



click

 

[ToolManTimTaylor]

Ahhhh I'm tellin ya he just neds a valve adjustment.

 

[Moose Truck]

Dhra

Well, take whatever you want of mine to get the exhaust right. I'll be in Indiana all next week, BTW.

Rat, The DHRA Nats are 1st Weekend in June, Not January Moose00

 

[Stark_Ent9802]

Ahhhh I'm tellin ya he just neds a valve adjustment.

We did a Valve adjustment tool man one night when you wern't there. It did Help alittle but you can still hear the huffing. I would still would be intrested in doing the gasket, just to see if i had and other internal damege in that engine

 

[Moose Truck]

Been There, Done That

Ahhhh I'm tellin ya he just neds a valve adjustment.

We did that valve adjustments 3 weeks ago. No change :{ Moose

 

[PRattenbury]

Rat, The DHRA Nats are 1st Weekend in June, Not January Moose00

Well, never hurts to get there a little early.