Here I am

Fall Brawl 2006...“War is simple, direct, and ruthless.”

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Who would like an official Chapter near Pittsburgh

Lebanon Valley New York

Jetpilot said:
All I know is from all the smack talking going on his truck better lay down 800+ RWHP.

no cop-out by any means but im not saying 800 is going to happen, this truck has not see a dyno in over a year, its all guess work. i will be safer and say oh 700's is about right, im only running a single on dieselfuel... ..... :-laf
 
Dockboy said:
Are we taking bets???? :-laf



675 max. is my guess :eek: ;) Still awesome!! But I think you guys better be prepared ;) :-laf



prepared for what--a good time. thats all im going for, if there is going to be a 2000hp truck ok great, im not building my truck for that, i tow, daily drive, sled pull and quarter mile my truck, and still get 23+ mpg, with 410 gears and 4x4. thats where the proof is, how versatle is it. and if this dyno is a true reading dyno, then it will put down low #,s if it is out there, it will put out stupid high #'s. my quarter mile times prove my #'s are higher than i thought, but just for you hp junkies :-laf i will be there win or lose, it does not matter to me, as long as i can make it home... ... ... ... . Oo.
 
DTroy said:
Oh ya ? I'm going to make 1,000 horsepower !! Mua ha ha ha.







(I'm going to run my truck twice. ) ;)





I think you better run more than twice if your going to claim that :-laf



now get off TDR and finish your secret weapon for this weekend





Michael
 
Hammer, I think you should make this a little competitive this year and offer a betting pool for people that want to guess there HP. Take two people, let them guess what they will lay down then the loser (person who is off by the most) owes the winner $1 for every HP they are off. :-laf



OK, enough I TRIED TO BY-PASS THE CUSSING FILTER chat, I got to get back to work if I want to make it.
 
lmills said:
Hammer, I think you should make this a little competitive this year and offer a betting pool for people that want to guess there HP. Take two people, let them guess what they will lay down then the loser (person who is off by the most) owes the winner $1 for every HP they are off. :-laf



OK, enough I TRIED TO BY-PASS THE CUSSING FILTER chat, I got to get back to work if I want to make it.

how did you blow a gasket anyway? bottle maybe :-laf
 
Bottle? we dont need no stinking bottle!! we make motor hp in this shop, no babies here. Well back to wrenching, it is going to be a long night! c u all in the morning, Lloyd and i will be there with half open eyes and XL cups of coffee after this night.
 
Scott- Are you eating breakfast before going tomarrow morning? If so what time? Maybe ride up together. Let me know. Tom
 
Hammer said:
So Wes. .

Does that mean all of us will be graced with Wade's presence or is he truely afraid of Lloyd?. Guess its a good thing Lloyd and Kretzer killed his headgasket and the parts are still a no show this way Lloyd won't be able to educate Wade on 3rd gen power.



Y'all might not have to worry about Wade either. Wade and RobertP just called for Wes to come help him after the two of them went for a 'test ride' earlier. Wes left the house muttering somthing about a blown freeze plug.



:{
 
I'll be there but i'm bringing my PSD which is like bringing a knife to a gun fight. . :-laf :-laf :-laf !! Not even a regular knife but one of those little plastic swords you get with a club sandwich :D :D :D The wife is making pasta salad as we speak. . See you tomorrow... .
 
Hammer said:
Hmmmm... .

Jengle is coming eh... .

Now I wonder what a guy has to do to get Chef Jengle to bring one of those rocking pork loins again?... ... ... Andy



Well, since I didn't have time to get the truck ready, how about a detail job? He he he... .
 
like i said in previous posts if this truck does anywhere between 750 and 850 i will be happy. there is no reason it should not put down this amount of power. not trash talk just facts



Robert... .

Truck strapped to "The Humbler" + Dave stomping on the loud pedal=Facts



There have been who have attempted to claim their power levels in the years I have been doing this. Some have been pleasantly surprised but for those few who have I have twice as many go home mumbling to themselves to figure out what happened.



so exactly what are you implieing????? to be honest i have noproblem with lloyd. and to be perfectly clear i like competition, thats what fuels my fire.



Wade...

What am I implieing you ask?...

Simple,I have seen all the trash talking that you have been doing lately about how nasty your truck is and yes in one thread you even went as far as implieing it feels like 800hp. The implication here is simple actually,beware as you may be in for a suprise for the number you get. See,many have learned that the seat of the pants o meter doesn't equal the dyno numbers. Personally,the shear spirit of competition is fun,but just enjoying what goes on to me is more fun. I've said it before and I'll echo myself here,Ernie and the gang do not call the Dyno-Jet the "Humbler" for nothing. It is a piece of equipment which broken more than a few hearts over the years. You need to relax was the whole point but you missed it completely.



Michael. .

You need a nitrous bottle like you need a paint can. Now step away from the giggle gas bottle and enough with the bad ideas... . LOL



Oh ya ? I'm going to make 1,000 horsepower !! Mua ha ha ha.



Hmm. .

Your truck twice + mine once and we may make that number. Wait a minute,with that smoke cloud at Carlisle you made driving through the showfield you should make 1000 easily.



I'll be there but i'm bringing my PSD which is like bringing a knife to a gun fight



And here all along I though Greg was the entertainment for us.



Tick Tick Tick... T-Minus 8hrs and counting. After detailing 2 trucks today I am finished and off to bed also,see you all there... ... . Andy
 
anyone have access to a freeze plug for the back of the block on a third gen. for tomorrow so i can get wades truck up there for sunday. we were out playing with the new trans and blew out the back freeze plug please anyone help.
 
Back
Top