Front Axle Nut Torque Spec

[Pizzamaker991]

I searched here but didn't find anything, maybe not using the right keywords... I'm changing the front axle U-joints on my '20 2500 and need the torque spec for the axle nut. I found the SKF spec book and it shows 107 ftlb plus 45 degrees. Is this correct?

 

[BigPapa]

Alldata lists it at 107 ft/lb plus 45*.

 

[Pizzamaker991]

Alldata lists it at 107 ft/lb plus 45*.

Thank you for confirming that.

 

[sag2]

Factory SM also says 107 + 45°