Here I am

Got a fix today

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Electricians?

Special Purchase: Roadmaster Active Suspension

Status
Not open for further replies.
I feel better now, had a good day. Ordered fuel pressure guage set up(Thanks again Andy at ADT www.smokindiesel.com) Ray's banjo bolts, tow mirrors plus filters and ods and ends (www.genosgarage.com) and a Rhino 3" performance exhaust(Thanks Stephan Kondolay for the heads up)



The withdrawal(sp?) symptoms should come back in a week or 2... . I think Bill K is offering performance packages now? Maybe if I tell the wife that by spending three grands I actually save a grand... ... ... ... ..... think it will fly:eek:



With my luck the lift pump will die when I put it the fuel pressure guage:rolleyes:



Done sharing:D ;)



Glenn
 
Her ya go Bill

Stephan Kondolay told me I might want to try those. That's what he runs on his truck. He says he got about the same drop in EGT's (about 150*)as a 4" at 25% of the cost. So I figured I'd give it a shot.



Here is were I bought mine for 49. 95$ + S/H or you can call Curt @ 219. 463. 9948. Real nice guy to deal with. Your local Midas also carries them but don't know how much they want for them(retail is 70$).



http://home.earthlink.net/~autoexhaust/



Here is the company propaganda, model # 911 is the one for our application, just fill the gap with a piece of 3" pipe if you cut the resonnator out(that's what I'm doing)



http://www.ipchuth.com/rhino/rhino.htm



I was going to install it myself but my local muffler shop said they'd do it for 50$ including the piece of 3" so why get dirty. 100$ for a "high performance " exhaust I'll try that! From the research I've done I'm told that up 'til about 400 HP I should not see a difference between this set up and a 4", time will tell. I'll post the results after I put it in (There's a rumor around the house that I'm getting an Edge Comp for chrismass:D :D ) As I said Stephan K. pointed this one out to me so you might want to ask him.



Sorry got long winded, hope it helps.



Glenn
 
Last edited:
What does it sound like? What type of flow will this handle? How long did it take you to get the muffler to you house. Just asking I got a 12v with a stuffed up sinus Ha Ha!! thanks Buddy
 
Not here yet

It's in a UPS truck somewhere between IN and TX. Left their shop on Wednesday, so should be here early next week. I'll post my first impressions when I get it on the truck. Hopefully the same day it'll get here:D :) :D



Glenn
 
Status
Not open for further replies.
Back
Top