Attention: TDR Forum Junkies 
Here’s my dilemma: I replaced my governor spring, fuel pin, and afc slide pin and o-rings. After putting the pump back together I struggled to get the throttle indexed.
After about the eighth time adjusting the throttle index I noticed that the throttle arm stopped returning to the idle stop. It had previously been snapping back to the stop screw.
I got the truck to start, very rough idle and sporadic peddle response. When I pushed the throttle arm to the idle stop screw the truck stalls.
I’m not done trying to index the throttle but can’t figure out what’s wrong with the return.
All help greatly appreciated.
After about the eighth time adjusting the throttle index I noticed that the throttle arm stopped returning to the idle stop. It had previously been snapping back to the stop screw.
I got the truck to start, very rough idle and sporadic peddle response. When I pushed the throttle arm to the idle stop screw the truck stalls.
I’m not done trying to index the throttle but can’t figure out what’s wrong with the return.
All help greatly appreciated.
