Engine/Transmission (1994 - 1998) I've Got Numbers

[KMSCD]

400+rwhp/800+lb-ft tq. That's what I'd like to get out of my engine. I'm still planning on an aftermarket 47RH but I'd like to know what mods I should do to get to those numbers. I have quite a list going for myself but I'm not sure all the mods I'm looking at will get me there. I know air and fuel are the keys but I'd like your help. I'm deployed right now and what off duty time I have, I spend looking at mods. Oo.

 

[MRector]

Check out my sig, I was at 441 rwhp and 998 tq with just the super B (not the special). Now I'm over 500 and I still have yet to clean up all the fuel I'm putting out.



Mikey

 

[KMSCD]

Sweet. Thanks for the reply. "My own custom dvs", what's a DV? 3GSK? I've seen timing mentioned and one of these days I'll get around to reading what PDR has about it...



These are the mods I have on my list: 62/12 Turbo, Governor Spring Kit 4,000rpm, Exhaust Manifold, Fuel/Cam Plate Kit 10/100/6, 370 Injectors, True Dual 4" Exhaust, and Brute Force/Work Horse Intake. I'm open to suggestions on any of these.

 

[JSienkowski]

Sweet. Thanks for the reply. "My own custom dvs", what's a DV? 3GSK? I've seen timing mentioned and one of these days I'll get around to reading what PDR has about it...



These are the mods I have on my list: 62/12 Turbo, Governor Spring Kit 4,000rpm, Exhaust Manifold, Fuel/Cam Plate Kit 10/100/6, 370 Injectors, True Dual 4" Exhaust, and Brute Force/Work Horse Intake. I'm open to suggestions on any of these.

DV's= Delivery Valves

3gsk= 3,000 rpm Govenor Spring Kit

Good Luck with your Deployment!!

 

[KMSCD]

DV's= Delivery Valves

3gsk= 3,000 rpm Govenor Spring Kit

Good Luck with your Deployment!!

I see the high flow and super high flow DVs on PDR with prices but no info page on them... do you think the high flows would be sufficient? Thank you. 4 months and 3 days left - not that I'm counting! Oo.

 

[MRector]

You should be able to reach 400hp with the high-flows, or if you could find some 181 dv's from a 96-98 truck, they will flow enough to support 400 as well.