Update on my Ultra CDP II
After about 300-350 rounds of mixed ammo I got into a box of Federal UMC 185 gr FMJ. I had been shooting through some cheap Fiachi 230 gr FMJ and other ball junk I picked up at a gun show several years ago. With the UMC ammo I had 4 instances where the slide locked prematurely after the 3rd or 4th shot. My initial impression was that the radius of the bullet was occasionally brushing the slide lock trip as the pistol cycled. A call to Kimber technical service confirmed that and they sent me an updated slide lock that has a greater clearance. So far, so good after another 100 rounds of UMC. After a few searches, I found I was not the only one to encounter this issue. In all cases, the ammo involved was ball ammo, never hollow points. In all the cases I found, either the free Kimber replacement or a replacement from Wilson Combat corrected the issue.
On the lighter side, this fine specimen of NC redneck had a difficult time communicating with the Kimber tech support guy located in Yonkers, NY. Maybe I Should have dialed in The Patriot for a three way conference call. Wasn't sure the guy got all my info correct until the part showed up 2 days later. Closed the call with me saying "Thank ya', Bo. 'Preciate that. " and him saying "Yo, fugetaboutit, piece o' cake. "