2nd Gen Non-Engine/Transmission Leveling kit and bump stops

[dieselshu]

For those who have installed d25 springs to level, did you replace the bump stops? If so what size and from who?



Thanks

Dave

 

[Nate]

If your shocks are the proper length, you should be ok with the stock bumpstops in terms of the axle not hitting into the frame/engine, etc.

 

[dieselshu]

I forgot to add that I am installing Bilstein 5100's so I am thinking of going with 3 1/2 " bump stops. Any thoughts?

 

[Bob Wagner]

my springs are getting powdered now

 

[Bob4x4]

I forgot to add that I am installing Bilstein 5100's so I am thinking of going with 3 1/2 " bump stops. Any thoughts?

Measure the available travel on the shock shaft,compare that to the distance to the bump stop. Then allow for how much the bumpstop will give.



Bob

 

[Makensmoke]

Also the trac bar length will need to be adjusted to center the axle again.