Here I am

Mag Hytec 727D Transmission Pan

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

1989 Crew cab conversion

Status
Not open for further replies.

grabinov

TDR MEMBER
SOLD: Mag Hytec 727D Transmission Pan

SOLD SOLD SOLD

Gents,

I have for sale a Mag Hytec 727D Transmission Pan. This is the "single deep" rather than the "double-deep" (727DD) model. It will fit all of the 727 transmissions from the late 60's all the way up through the 48RE - not including the 68RFE. I have one on my 2004 Dodge Ram Cummins truck and I like it, so I bought one for my newly built 1970 Plymouth Roadrunner. Strangely (you're gonna laugh), the truck makes it out of the driveway with no problems, but the Roadrunner - which is like 6 inches off the ground - rubs with this pan on it, as evidenced by the pictures. Go Figure!

Roadrunner - Dragus Transmissionpanius

IMG_1208.jpg


Transmission Pan (After quick escape from Coyote)

IMG_2077.jpg


Picture of scuff marks

IMG_2078.jpg


Picture of the good clean mating surface

IMG_2079.jpg


Other than one trip up the driveway, and another one back down, the pan has no miles on it - not that it's exactly a wear item, except in my case. It comes from Mag Hytec for $255.00 with a gasket and a filter. I used those up by installing them for my 5 minutes of run time in and out of the driveway, so you'll need to get you own. I DO have the nice allen head bolt and washers that came with the pan. I figure it's gotta be worth say $125.00 despite the scuffs. The scuffs are literally skin-deep as the pan itself is nearly 3/16 thick. This pan has the advantage of holding a significant amount of extra fluid, being made of aluminum to cool more efficiently, and having a built in bung to install a temperature sender, which the stock pan does not.

Get yourself a new gasket for aluminum to aluminum (trans to pan) and you're good to go for half the price of a new one...

PM me

Greg

IMG_2078.jpg


IMG_2077.jpg


IMG_1208.jpg


IMG_2079.jpg
 
Last edited:
Status
Not open for further replies.
Back
Top