Competition MAX HP: 12V or 24V?

[Sled Puller]

Speaking of billet:

"Injection Pump Housings machined from billet ... "

An upgrade form the Sigma pump, which is an upgrade from our Bosch P-Pump.

Prices:

$12,750 for Billet



$9450 for the Sigma, thats 17mm barrels.



P-Pumps:

1300cc 13mm 6 Cyl. $4700





1100cc 13mm 6 Cyl. $4400





800cc 13mm 6 Cyl $3800



14mm 6 Cyl. $5400





We are only scratching the surface on TDR. Nobody on this board has even come close to running that much fuel, let alone try and burn it.

 

[Jim Fulmer]

I like that site too Gene... ... those pumps are nuts!



Jim

 

[bluthndr]

New guy question

Just for reference, what does a "good" 913 (215hp) pump fuel - with all the "bolt on" upgrades (no pump stand/bench/work)? How many ccs?

 

[Jim Fulmer]

Just for reference, what does a "good" 913 (215hp) pump fuel - with all the "bolt on" upgrades (no pump stand/bench/work)? How many ccs? Maybe 350cc's



Can't even guess on that one but there pretty good, on top of that it depends on who is doing the setting up and tuning



Jim

 

[GO 4LO]

So who has those pumps? And who does the billet heads - Staab?

Chris

 

[GO 4LO]

Originally posted by GO 4LO

So who has those pumps? Chris

Never mind on that question. I'm on that site every once in awhile and still didn't recognize the prices. D'oh!

Chris

 

[therabbittree]

what site is that?... www.staabmachine.com makes billet heads, and other pulling parts ... i'd like to see that site with the pump stuff... .

commeeoooon give it up

later

Deo

\x/ hillfolk!

 

[GO 4LO]

It's Columbus Diesel Supply. www.columbusdieselsupply.com

Chris

 

[GO 4LO]

Originally posted by therabbittree

what site is that?... www.staabmachine.com makes billet heads, and other pulling parts

The question is - do they do parts for the Cummins as well?

Chris

 

[HoleshotHolset]

#ad




Billet 'sigma' P-pump = drool !!!



That's a recipe for a dieselhead woody...



Matt

 

[HoleshotHolset]

Taken from: http://www.columbusdieselsupply.com/gallery/p11.gif



#ad




Gee... I wonder who does the pump work for EEP?!



Matt

 

[CumminFast]

How is Mitchell's truck doing this year? Has he and Schied pulled against each other yet?

 

[Sled Puller]

Hes doing really well, no more bounce,and he got around Kent once, so far.

 

[CumminFast]

I hope yall come down to Jesup again this year. I enjoyed Jesup about the same as the Muncie pulling.

 

[HoleshotHolset]

got bounce?

Dave had a real problem with Bounce last year... so did I, but that's another story...



Matt

 

[GO 4LO]

Originally posted by HoleshotHolset

Gee... I wonder who does the pump work for EEP?!



Matt

Yeah, that's how I originally found CDS - the link from EEP's site!

Chris

 

[HoleshotHolset]

Methinks CDS builds some sick injection pumps...



Matt

 

[TxDieselKid]

So now that you can see the advantage with pumps from billet(no weight advantage), just think if you start using other parts of billet.

 

[Hohn]

Originally posted by Joseph Donnelly

Why hasn't anyone with a 24V made 800 hp with diesel only, let alone with only one turbo?

Better yet, why don't people use long division instead of these pesky calculators??



Dang technology...

 

[Hohn]

Yikes-- left field even!



Book of DOH, chapter one... .