Mopar Turn signal tow mirrors

[SKargo]

I'm going to try and get some pics up shortly.



I was getting 5-6 PM's a day from people saying they wanted these mirrors, now that there here, no one seems to want them

 

[jsimpson]

There might be ONLY two of us. Gettin' on toward the half-century mark ain't a pretty thing to watch. :-laf

dang younguns braggin agin!

 

[LightmanE300]

I'm going to try and get some pics up shortly.



I was getting 5-6 PM's a day from people saying they wanted these mirrors, now that there here, no one seems to want them

The reason nobody seems to want them is because you haven't answered the most critical questions nor have you or anyone else posted any worthwhile pictures. I'm not sure about you guys, but the above posted tiny pictures are just about worthless because they are so small - no offense to the original poster of the pics, who was undoubtedly trying to help. I'm interested in the mirrors for sure, but not until I see a large clear picture of them on a ram, see how they work, and also get the answer to the question regarding the wiring and installation. Show us the path to the upgrade, and many of us will take it!!

 

[jsimpson]

I had Cipas on my 94 and was quite pleased with them, but my 03 tow mirrors are better made, extend further and work better. I can't see shelling out half a G to get lights on my mirrors. Wally Mart has add-on mirror lights for $11. 95.

 

[DocDetonancour]

Has anyone found chrome covers for the stock mirrors?

 

[AlexWV]

The reason nobody seems to want them is because you haven't answered the most critical questions nor have you or anyone else posted any worthwhile pictures. I'm not sure about you guys, but the above posted tiny pictures are just about worthless because they are so small - no offense to the original poster of the pics, who was undoubtedly trying to help. I'm interested in the mirrors for sure, but not until I see a large clear picture of them on a ram, see how they work, and also get the answer to the question regarding the wiring and installation. Show us the path to the upgrade, and many of us will take it!!

I second that. I've been coming back to this thread looking for a decent picture and the answer to the wiring question. I think I like the look of them but can't really tell. Daylight pic will be fine, don't need to see what the lights look like when they are lit up.

 

[SKargo]

The reason nobody seems to want them is because you haven't answered the most critical questions nor have you or anyone else posted any worthwhile pictures. I'm not sure about you guys, but the above posted tiny pictures are just about worthless because they are so small - no offense to the original poster of the pics, who was undoubtedly trying to help. I'm interested in the mirrors for sure, but not until I see a large clear picture of them on a ram, see how they work, and also get the answer to the question regarding the wiring and installation. Show us the path to the upgrade, and many of us will take it!!

I have the pics. We installed a set on a truck at our lot, and I took the pics today. I will post them tonight when I get home. I missed the wiring question, forgive me, I will ask the techs to be certain, but pretty sure they were plug and play.



I don't belive these are cipas, like people are saying, these look bigger to me.

And for the guy sayong paying half a grand isn't worth it, if you'd ask me, I'd tell you via PM what the TDR discount is.



Selling these mirrors doesn't really line my pockets, I was trying to help out here since everyone seemed interested.



Sorry I was slacking so hard, just been busy, I need to hire a shipper.

 

[Snoxracer]

Well I still don't have the means to take good pictures (Just worthless pictures from a pic phone). But I can answer the wiring question: No they are not just plug and play, close but no. They come with wiring that has the ends that snap in the factory plug in the door panel. Then you have to run the wire for both the turn signal and marker light next to the factory wiring harness, thru the rubber boot at the door hinge, into the kick panel, pull the carpet back to run the wiring under it, pass thru the fire wall, unbolt the fuse panel and tap into the correct wires for left-right signals and park lights. Just takes alittle time, pretty much a no brainer if you can look at the pictures in the instruction manual. Well that is all I pretty much have, if I do find a camera I try to post some pics. Thanks



Snoxracer

 

[SKargo]

Pics.

#ad




The rest are here, see if anyone recognizes that blue beauty in the reflection :-laf

http://scottkarg.com/mirrors/index.html

 

[RTuvell]

Thanks for the pics Scott!

 

[SKargo]

You're welcome, sorry it took me so long.

 

[SKargo]

Can anyone verify if these are cipas or similar. They look alot like them to me, but I was told they aren't made by them. Not sure if Ibelieve that or not after looking at some pictures.

 

[Snoxracer]

I would have to beleive that they are, if you look on the web site for CIPA they have a mirror that looks the same and even has the cut out for the turn signal-marker light.



Snoxracer

 

[SKargo]

Thanks Snoxracer, I think you're right, although for the new trucks, they say coming soon. And no listing for a signal mirror.

 

[SKargo]

Thank for the orders so far, I have 4 sets left for the group buy.

 

[SKargo]

I think I have answered all the questions here?



Bueller... Bueller... Bueller...

 

[tgbol]

For us second genners these are available

http://www.visionviewmirrors.com/extendable_replacement_mirrors.htm

 

[JohnnyH]

Scott... I tried to send you a PM, but your box is full. Can you PM me the specifics on the mirror. Also, do the offer better visibility than the flip up mirrior I have now.



Thanks

John

 

[SKargo]

Scott... I tried to send you a PM, but your box is full. Can you PM me the specifics on the mirror. Also, do the offer better visibility than the flip up mirrior I have now.



Thanks

John

Sending you a PM now.

 

[BlueRam2500]

SKargo, PM sent about the mirrors.