need getrag help

[edmeyers]

need some help with how to rebuild the top cover and shift forks on my getrag also pics of it would help. thanks

 

[Rebel Ram]

Better late than never. Once you have the trans out and the top off you will see that the forks ride on round rails. The forks and shifter links are held by roll pins. The rails are captured at each end by 20mm plugs. These can be driven out with a 3/8" extention and hammer. Go a little at a time. Watch for springs and balls and note there possition. Also small round pins crossways in the rails. these will become visable as you drive the rails out. I just finished my G360 and am VERY pleased with my success. I an no pro but I learned allot this week and would be happy to help as I can. PMs ok.