2nd Gen Non-Engine/Transmission need tips on centering axle...

[BJonesUSA]

I'm almost complete in my mission to eliminate the steering slop in my '02... I have an adjustable 3rd Gen trackbar, 3-turn PSC gearbox, and a DSS. I have the new tierods and stuff to go to a inverted-t, but I want to make sure my axle is centered before I start. Right now when I'm driving, the truck pulls to the right, and I have to correct it by about 10-15 degrees countersteer to the left. Can you guys who have put on an adjustable trackbar tell me how you went about recentering your axle? Any tips or suggestions would be greatly appreciated. TIA

 

[AKAMAC]

I used a 4' level and referenced off the fenders. I did compensate for the chassis by measuring offset of the frame to body difference. Mine was only 1/16 off.

For a gross measurement you can use a tape measure and look at the distance of the frame to the tire while the wheels are straight.

Hope this helps.