Here I am

Engine/Transmission (1998.5 - 2002) no fuel to gauge lahf line

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff
Status
Not open for further replies.
Can some one help me i got my kit from genos. hooked up tonight and cycled key no fuel???????????????? It say to hand tighten line to vp44 and turn 3/4. I have no fuel to isolator???? iam i doing something wrong. Is the scharder valve not opening IAM STUCK. also genos says no teflon tape on the lahf line . how about the rest of connections. Andy
 
Is your lift pump working :confused: If yes then you need to bleed the lines by cracking the connection at the VP and cycle the key till you get some seapage then tighten back up.
 
Andy , it may be possible that you have the wrong end of the FAHF line attached to the VP44 . The line I just purchased has two different ends. Try swapping ends connected to the VP44. Don't know the answer about the teflon tape.
 
Status
Not open for further replies.
Back
Top