Passenger Window Woes, 99' 2500

[REdmon]

Little lady went to roll passenger window down and the glass fell down at a 45 degree angle. I took the door panel off and the glass is out of the channels and I can see that the plastic slide that the front roller goes in is cracked (the metal arm that holds the roller going into the white plastic slide has the right hand side broken off. (1st pic shows the metal are moving without the slide moving with roller)

What is the correct procedure for getting the glass back into the channels. I see at the bottom of the glass there are two areas that capture the glass (metal clamps that look to have hardened adhesive, although it may be hard rubber). I tried pushing the window up from the bottom but wouldn't budge out of the clamps (Shown in 1st photo} and I didnt want to apply to much force before I checked with you guys.

Thanks for your help.
Ron

 

[honobiahunter]

Maybe this will help
http://dodgeram.org/tech/repair/body/door_glass/replacement.html

 

[REdmon]

Thank you for the link. With this procedure, I should be able to knock it out right away.

Thanks again,

Ron