Here I am

Performance Modifications

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd gen guy needing 3rd gen advise

FASS question

Status
Not open for further replies.
Hey guys,

I am new on here and I just got an 07' 2500, 6 spd, black. I am going to be using it for a lot of pulling but I was just wondering about modifications. This is my first diesel and i have been doing a lot of reading about them. I would eventually like to get my truck up to around 550 horses and 1000 TQ, but what should I start with and what do I have to worry about warranty and emmissions with.
 
Welcome! I suggest searching this site entirely for info if you have a lot of questions. There are many choices. A programmer will more than likely void your warranty, so research those and be careful about engine warranty work. Since I don't know that much about your dealer or dealers in general, I will stop there. I would ask your dealer about intakes, exhaust, etc. , they are pretty lenient about those things.



Fill out your profile too! Then you don't have to list your truck/mods everytime you post. Enjoy it here, there are lots of good guys around!



Nick
 
Last edited:
Status
Not open for further replies.
Back
Top