Competition Project: Air Shut-Off

[Sled Puller]

Dash installed:

(Many thanks to Brandon, Snap-On man, for red dash idea)

 

[jtisdale]

sweet

 

[OPoole]

Need any Blow-off valves to put in front of the shut off to help turbo bark??

 

[Sled Puller]

Good question, I have a Tial blow-off, I was planning on installing, but I ain't sure how to make it operate properly yet!!

It will prolly be one of those I wished would have put on... :{

 

[OPoole]

The TiAL Blow-off works off of Vacuum. Once the shut off Valve closes looks like the motor would make vacuum for a short peroid to open tial blow off and save your turbo. I have TiAL products here also.

 

[DieselTweaker]

Matt,



Columbus Diesel Supply has them listed as well, check the link out and give mark a call





http://columbusdieselsupply.com/ps4.htm

 

[OPoole]

I went ahead and tig this up.

 

[Hammer]

You are right, that is Hammers truck.

Now even they know thats not true,look at how dirty those injector lines are... LOL... . Andy

 

[Klassen]

could u not get some electric valves to shut the oil line of going to turbo if this is the only way u get a runaway. just a thought.

 

[COMP461]

looks great

 

[sbentz]

The question of in the horn or before the turbo?? I did mine ahead of the intake manifold. I built a simple butterfly vlave, and spring loaded to shout off. I felt the same, if a turbo let loose with oil, it may block some, and the thought of a turbo getting the intake air slammed shut seems a bit damaging. Either one works.

 

[sbentz]

The question of in the horn or before the turbo?? I did mine ahead of the intake manifold. I built a simple butterfly valve, and spring loaded to shut off. I felt the same, if a turbo let loose with oil, it may block some oil and possible debris, and the thought of a turbo getting the intake air slammed shut seems a bit damaging. Either one works though.



https://www.turbodieselregister.com/forums/showthread.php?t=117215