Here I am

2nd Gen Non-Engine/Transmission Repairs for the DEATH WOBBLE

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

2nd Gen Non-Engine/Transmission wheel bearing

2nd Gen Non-Engine/Transmission Track bar what the !!!!!!!!

Status
Not open for further replies.
Death wobble...

The best permanent fix for the death wobble after making sure your front end is tight and the bushings are good is to take the truck to an alignment shop that knows what they are doing. Dodge put way too little caster in the front end from the factory. Have them increase the faster to 2. 5-3 degrees. I did this to mine after replacing the loose parts and the truck is still solid as a rock after 60k miles. Best steering mod you can do.

Proper service (OEM trackbar gone. . ), alignment, and get rid of that Y configuration center link that's on the 2nd Gen's... .
 
Status
Not open for further replies.
Back
Top