Attention: TDR Forum Junkies 
Cummins Drivers: I'll be changing the fuel filter soon on my '96, so thought I would also install new rubber inlet and return fuel lines. I found some 3/8 inch i. d. Aeroquip blue hose that is rated for gasoline and other fuels. I was wondering if that stuff would be sufficient.
The parts guy also showed me some Aeroquip braided hose with wire in it and abrasion coating on the outer layer. That requires fittings installed at each end of the hose. Anybody done this? Or can someone point me to a good supply house to get the correct, heavy duty hose I need? Thanks, guys.
The parts guy also showed me some Aeroquip braided hose with wire in it and abrasion coating on the outer layer. That requires fittings installed at each end of the hose. Anybody done this? Or can someone point me to a good supply house to get the correct, heavy duty hose I need? Thanks, guys.
