Rudder Wiper Blades

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Henderson, NV. Cummins Shop?

Which service manual?

Status
Not open for further replies.

Blu-meanie

TDR MEMBER
Anybody know where to get those windshield wiper blades with the rudder that pushes the blade toward the windshield? The ones with the metal (probably plastic now) arc-shaped dealies that catch the wind.

:D
 
I bought wiper helper clip on springs at Love's truck stops(about $4. 00). They help with my snow wipers. Would like to find a stronger spring to replace the original. Any ideas?
 
The blades I like are TRICO Wind Spoiler part number series 36-XXXX. They are metal, and have the deflector wing on them. Call some of your local auto supply shops and find out who has 'em.



Tom
 
Ron, if your boat only turns left, right and goes straight you don't know what you're missing if you never tried Rudder Wiper Blades. Unlike other rudder wipers Rudder Wiper Blades are American Rudder Institute (ARI) approved and won't void your warranty. Since I started using Rudder Wiper Blades I've extended my rudder changes to 100k knots, rudder analysis says it's still good to go. Top end of my rudder is spotless. Contrary to what others may say Rudder Wiper Blades will not cause hull leaks.
 
My grandfather once had a wudder riper. If you have never had ripe wudder you haven't been to Helena.



Ron, what do you do to keep the wiper on the windshield at 60 MPH in the snow of a Montana winter?
 
Merciless....

Wow, a one-letter typo and all hell breaks loose. You guys are merciless. :D



P. S Same letter twice, OK. Just to short circuit the next post about my math.
 
Last edited:
Ah, Wfernau..

that's easy. I just put my see-through floor mats on the windshield and don't even have to use the wipers. I tried my winter cover, but my eyelashes froze to my face from looking out the side window. Fun post, for sure!!!!

Ron
 
Status
Not open for further replies.
Back
Top