Thought I might share this with everyone incase someone else runs across this problem. Customer brings us 99 24v stuck in limp mode. This happened one week after he had the trans built. We check it no codes but has a dead lift pump. Keep in mind this thing will barely pull itself. Just when you decide you have seen it all you get that humbling experience, this was mine. Below I will list the parts I changed, going from educated guesses to plan ole shooting in the dark.
1. lift pump
2. Vp44
3. Ecm
4. PCM
5. APPS
6. Map sensor
7. cam sensor
8. crank sensor
9. not sure what else
At this point the poor customer is scared of getting billed for all this installing and uninstalling of parts. So I tell him you pay for the part that fixes it and I'll eat the labor. At this point I send it back to the transmission shop for him to check his work. He lets me know real quick "there's nothing wrong with my transmission" blah blah blah. I am sure it is the transmission so we decide to put the DTT transmission out of my truck in it. While we are deciding when to do this we adjust the transmission kickdown cable which that horses patoot didn't even adjust properly. Guess what that fixed it, I didn't know a transmission cable out of adjustment would do it, but it will.
hope this helps someone
Tim
1. lift pump
2. Vp44
3. Ecm
4. PCM
5. APPS
6. Map sensor
7. cam sensor
8. crank sensor
9. not sure what else
At this point the poor customer is scared of getting billed for all this installing and uninstalling of parts. So I tell him you pay for the part that fixes it and I'll eat the labor. At this point I send it back to the transmission shop for him to check his work. He lets me know real quick "there's nothing wrong with my transmission" blah blah blah. I am sure it is the transmission so we decide to put the DTT transmission out of my truck in it. While we are deciding when to do this we adjust the transmission kickdown cable which that horses patoot didn't even adjust properly. Guess what that fixed it, I didn't know a transmission cable out of adjustment would do it, but it will.
hope this helps someone
Tim