TPMS and valve stem recommendations for 19.5 setup

[lpennock]

I think you'll find 100/101 is as high as they will read. At least that's the way it is on my truck. I run 104 to 108 psi. At least I'll know if the pressure drops below 100. I wonder if that's a parameter alphaobd can change?

Probably not. It is probably the range of the pressure transducer.

 

[brillmtb1]

I read 104 today

 

[R&RBilyeu]

Probably not. It is probably the range of the pressure transducer.

Guess that's something I'll look into at tire changing time. I'm pretty sure they're Dill transducers in there presently. Hopefully I can get ones that'll read over 100 psi.

 

[brillmtb1]

Ill put 110 in this weekend a s see if it read thats. Oem pre programed so simpler

 

[JPM]

Dill engineer told me the 101psi max is probably in the receiver computer

 

[brillmtb1]

We will see

 

[AH64ID]

Probably not. It is probably the range of the pressure transducer.

The OEM sensors are the same, aside from DRW inners, for 1500-5500. They should have no problems with LRG pressures.

 

[lpennock]

The OEM sensors are the same, aside from DRW inners, for 1500-5500. They should have no problems with LRG pressures.

Good point. For some reason I had thought they used LRF on 4500-5500 which would come under 100psi but checked and it is LRG so I was wrong.