Engine/Transmission (1998.5 - 2002) transmission governor solenoid and pressure transducer

[FourBarR]

Does the governor mounting plate need to be removed when changing these things or is there a clamp of some kind that holds them in. Question arises as to the gasket underneith will be required before hand. ? Thanks for your help.

 

[JLandry]

FourBarR,



No internal gaskets are needed to replace the governor pressure sensor and/or pressure solenoid. There's a metal bracket that has to be removed first, then they pop right out.



Here's a post on the Cummins Forum showing pictures that might be helpful.



John L.

 

[cerberusiam]

Depends on whether you want to remove the gov housing for cleaning. It can collect garbage in the passages so there is a benfit in removal. If the gasket has neve rbeen replaced I would have on on hand and replace it.