This weekend while towing my 5th wheel(15k weight) I had gone 120 miles with no issues. I came to a stop sign and once I took off as normal, the truck (auto trans) shifted into second gear and about 13-18 lbs of boost it turbo bark and completely lost power about 3 times in a row. I eased off the pedal and it stopped, eased back into it and truck shifted to third then the TC locked in third I was at 55-60mph, boost was around the same and it did it again multiple times. I slowed down to 40mph and it stopped. I pulled over and called my dad to have him to my 5th wheel home. I drove the truck and kept the boost under 8 and drove at 60mph home(another 150 miles) and had no issues.
I figured with no boost and no load it would drive fine, but I am trying to figure out the turbo bark under load and power loss. Any help is appreciated.
I have had turbo bark while shifting under load and thought that was normal as it would bark but no lose power. Truck has 170,000 miles and mods are in my sig.
I figured with no boost and no load it would drive fine, but I am trying to figure out the turbo bark under load and power loss. Any help is appreciated.
I have had turbo bark while shifting under load and thought that was normal as it would bark but no lose power. Truck has 170,000 miles and mods are in my sig.