Engine/Transmission (1998.5 - 2002) Vulcan Big Line Kit/replaced vp44 help

[Walleye mike]

Was out of town when the vp-44 went out. I left the truck at the local near my cottage dealer for them to replace it. I have a vulcan relocate kit on the truck. My questions is that there is now no gasket (banjo washer) at the pump. I cant find the directions from the kit to see if there was one? Also what is the proper torque for that fitting as im rechecking their install.

 

[JLandry]

Mike,

According to the Dodge service manual, the correct torque for the VP44 fuel inlet banjo fitting is 18 Ft. Lbs. (24 Nm).

Yes... a gasket is required on both sides of the banjo fitting at the VP44 fuel inlet.

Best regards,

John L.