06 no start when warm

[travis97cummins]

06 cummins will not start after u shut it off when it is warmed up truck is stock no mods at all. Were should i start

 

[jhenderson]

Sounds like injector problems. Get a line cap and cap 1 line at a time at the rail until the truck starts. That is the bad injector. When an injector goes bad, you can't make enough rail pressure to fire the other injectors.

 

[travis97cummins]

KOEO clicking noise coming from valve cover is this normal

 

[JJPage]

Get a line cap and cap 1 line at a time at the rail until the truck starts. That is the bad injector.

Or... . that is the cross tube that is out of torque. First, I would re-torque all 6 cross tubes to 39ft lbs, if that does not solve the issue, then what jhhenderson says

KOEO clicking noise coming from valve cover is this normal

Travis, I am not aware of what KOEO means, but as far as the clicking from the valve cover, that is a normal noise caused by the injector solenoids operating.
Jess

 

[cerberusiam]

Travis, I am not aware of what KOEO means, but as far as the clicking from the valve cover, that is a normal noise caused by the injector solenoids operating.

Jess

Key On Engine Off.



Second checking the cross over tube TQ for a start. Then start capping them if needed to see if it will start.

 

[JJPage]

Key On Engine Off.

KOEO... too much for me